UHF/VHF Digital Migration Radio display/part /keypad
- Lone Worker
- Secure Communications
- Pre Programmed Texts
Compact, lightweight and easy to operate
The handhelds of the PD5 series are particularly ergonomic and easy to operate. With a weight of only 280 g, the PD565 offers a high level of mobility comfort.
Long battery service life
The lithium-ion battery (1500 mAh) included in the scope of delivery achieves an operating time of at least 16 hours (operating cycle 5-5-90). With the optionally available 2000-mAh battery, it will even be 20 hours.
Support of analog and digital mobile radio
The PD565 was developed in compliance with the ETSI mobile radio standard Digital Mobile Radio (DMR). The handheld radios support the conventional DMR operation and can also be operated in analog mode. That makes this handheld the ideal companion for the move to digital mobile radio.
Pseudo trunkung
With the patented pseudo trunking, this radio dynamically utilize the timeslots of a frequency. As a result, they can utilize both timeslots in DMO and RMO mode in the conventional DMR operation. This guarantees an efficient frequency utilization.
| General | ||
| Frequency Range | UHF: 400-470MHz , VHF: 136-174MHz | |
| Channel Capacity | 512 | |
| Channel Spacing | 25/20/12.5KHz | |
| Zone Capacity | 32 | |
| Operating Voltage | 7.4V (rated) | |
| Battery (5-5-90 Duty Cycle, High TX Power) | 1500mAh (Li-Ion)/2000mAh | |
| Battery Life (5/5/90 ) | Analog: about 11 Hours Digital: about 16 Hours |
|
| Frequency Stability | ±0.5ppm | |
| Antenna Impedance | 50Ω | |
| Dimensions | 115 x 54 x 30mm | |
| Weight | 280g | |
| Transmitter | ||
| RF Power Output | VHF High power: 5W VHF Low power: 1W UHF High power: 4W UHF Low power: 1W |
|
| FM Modulation | 11K0F3E @ 12.5KHz 14K0F3E @ 20KHz 16K0F3E @ 25KHz | |
| 4FSK Digital Modulation | 12.5kHz Data Only: 7K60FXD 12.5kHz Data & Voice: 7K60FXW | |
| Conducted/Radiated Emission | -36dBm<1GHz -30dBm>1GHz | |
| Modulation Limiting | ±2.5KHz @ 12.5KHz ±4.0KHz @ 20KHz ±5.0KHz @ 25KHz | |
| FM Noise | 40dB @ 12.5KHz 43dB @ 20KHz 45dB @ 25KHz | |
| Adjacent Channel Power | 60dB @ 12.5KHz 70dB @ 20/25KHz | |
| Audio Response | +1 ~ -3dB | |
| Audio Distortion | ≤3% | |
| Digital Vocoder Type | AMBE++ or SELP | |
| Digital Protocol | ETSI-TS102 361-1，2&3 | |
| Receiver | ||
| Sensitivity | Analog | 0.22μV (12dB SINAD) 0.22μV (Typical) (12dB SINAD) 0.4μV (20dB SINAD) |
| Digital | 0.22μV /BER5% | |
|
Adjacent Selectivity
TIA-603
ETSI
|
60dB @ 12.5KHz / 70dB @ 20&25KHz
60dB @ 12.5KHz / 70dB @ 20&25KHz
|
|
|
Spurious Response Rejection
TIA-603
ETSI
|
70dB @ 12.5/20/25KHz
70dB @ 12.5/20/25KHz
|
|
|
Inter-modulation
TIA-603
ETSI
|
70dB @ 12.5/20/25KHz
65dB @ 12.5/20/25KHz
|
|
| Hum & Noise | 40dB @ 12.5KHz 43dB @ 20KHz 45dB @ 25KHz | |
| Rated Audio Power Output | 0.5W | |
| Rated Audio Distortion | ≤3% | |
| Audio Response | +1 ~ -3dB | |
| Conducted Spurious Emission | < -57dBm | |
| Environmental Specifications | ||
| Operating Temperature | -30℃ ~ +60℃ | |
| Storage Temperature | -40℃ ~ +85℃ | |
| ESD | IEC 61000-4-2 (level 4) ±8kV (contact) ±15kV (air) | |
| Dust & Water Intrusion | IP54 Standard | |
| Humidity | Per MIL-STD-810 C/D/E/F/G Standard | |
| Shock & Vibration | Per MIL-STD-810 C/D/E/F/G Standard | |