Feature Rich Digital Migration Radio with display and full keypad
- Feature Rich Digital Radio
- Lone Worker Man Down
- 1024 Channel Capacity
- 1024 Channel Capacity
- Full Band - Expanded frequency range of 400-527MHz
- Dual Mode - Analogue and Digital, migrate with ease
- Small, Sleek, Light - 122 X 54 X 27mm, 310g
- MO True 2-Slot - In DMO can provide 2-slot communication, which allows for 2 talk paths on 1 frequency
- Pseudo Trunk - This virtual trunking feature allocates a free timeslot for urgent communications
- GPS (Factory Option)
- Small, sleek and light - 119 x 54 x 27 mm, 290g
- Lithium-Ion battery
- Basic digital encryption and scrambler in analogue mode
- Advanced Signalling including HDC1200, 2-tone and 5-tone
- Rugged, reliable and submersible - MIL810-C/D/E/F/G and IP67 rating
- Excellent voice quality
- Buttons separated by antenna to reduce erroneous operations
- Supports One Touch Call / Text
- DMR Data Service
General data
|
|
Frequency range
|
VHF: 136 – 174 MHz
UHF: 400 – 527 MHz |
Supported operation modes
|
DMR Tier II in reference to ETSI TS 102 361-1/2/3 |
Channel capacity
|
1024
|
Zone capacity
|
64
|
Channel spacing
|
12.5 / 20 / 25 (analog)
12.5 kHz (digital) |
Operating voltage
|
7.4 V (nominal)
|
Battery
|
1500 mAh (Lithium-Ionen-Akku)
|
Battery service life (5/5/90)
|
approx. 11 h (analog)
approx. 16 h (digital) |
Frequency stability
|
±0.5 ppm
|
Antenna impedance
|
50 Ω
|
Dimensions (H×W×D)
(with standard battery, without antenna) |
119 x 54 x 27 mm
|
Weight
|
approx. 310 g
|
Programmable keys
|
3
|
LCD display
|
160 × 128 pixels, 65,536 colors, 1.8 inch, 4 lines
|
Transmitter
|
|
Transmitting power
|
VHF: 1 / 5 W
UHF: 1 / 4 W |
Modulation
|
11 K0F3E at 12.5 kHz
14 K0F3E at 20 kHz 16 K0F3E at 25 kHz |
4FSK digital modulation
|
12.5 kHz (data only): 7K60FXD
12.5 kHz (voice & data): 7K60FXW |
Interfering signals and harmonics
|
-36 dBm < 1 GHz
-30 dBm > 1 GHz |
Modulation limiting
|
±2.5 kHz at 12.5 kHz
±4.0 kHz at 20 kHz ±5.0 kHz at 25 kHz |
Noise suppression
|
40 dB at 12.5 kHz
43 dB at 20 kHz 45 dB at 25 kHz |
Adjacent channel selectivity
|
60 dB at 12.5 kHz
70 dB at 20/25 kHz |
Audio sensitivity
|
+1 dB to -3 dB
|
Nominal audio distortion
|
≤ 3%
|
Digital vocoder type
|
AMBE+2™
|
Receiver
|
|
Sensitivity (analogue)
|
0.22 μV (12 dB SINAD)
0.22 μV (typical) (12 dB SINAD) 0.4 μV (20 dB SINAD) |
Sensitivity (digital)
|
0.22 μV / BER 5%
|
Adjacent channel selectivity
TIA-603 ETSI |
60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz
60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz |
Intermodulation
TIA-603 ETSI |
70 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz |
Spurious response rejection
TIA-603 ETSI |
70 dB at 12,5/20/25 kHz
70 dB at 12.5/20/25 kHz |
Spurious response rejection
|
40 dB at 12.5 kHz
43 dB at 20 kHz 45 dB at 25 kHz |
Nominal audio power output
|
0.5 W
|
Nominal audio distortion
|
≤ 3 %
|
Audio sensitivity
|
+1 dB to -3 dB
|
Conducted spurious emission
|
< -57 dBm
|
Ambient data
|
|
Operating temperature range
|
-30 °C to +60 °C
|
Storage temperature range
|
-40 °C to +85 °C
|
ESD
|
IEC 61000-4-2 (level 4)
±8 kV (contact discharge) ±15 kV (air discharge) |
Protection against dust and moisture
|
IP67
|
Shock and vibration resistance
|
MIL-STD-810 C/D/E/F/G
|
Relative humidity
|
MIL-STD-810 C/D/E/F/G
|
GPS (nur PD685G)
|
|
TTFF (cold start)
|
< 1 minute
|
TTFF (warm start)
|
< 10 seconds
|
Horizontal Accuracy
|
< 10 meter
|
All Specifications are tested according to TIA/EIA-603, and subject to change without notice due to continuous development.